New Ideas about Slip Folds between Layers
-
摘要: 本文报道的是出现在许多沉积岩区, 发育在厚薄相间岩层之中, 并由于层间滑动作用形成的AB复合或过度型褶皱.它具有不止一个方位褶皱枢纽, 表征非共轴叠加褶皱形态, 经历了早期B形和晚期A形褶皱演化过程, 最终形成迄今鲜有报道, 但却实际广泛存在.文中首先介绍了这一褶皱在西藏、湖北黄石、湖北秭归, 四川西昌等地区的野外产出状态, 继而从横剖面、纵剖面、平面以及立体空间角度描叙了它的全方位几何形态特征, 进而从变形介质结构和剪应变值(γ) 的物性特征方面分析了它的变形控制条件, 最后以“滑移褶皱极限”理论并部分借鉴鞘褶皱的形成机理探讨了它的形成演化过程.
-
关键词:
- 层间滑动作用 /
- AB复合或过度型褶皱 /
- 变形条件 /
- 形成机理
Abstract: The AB compound type or transitional type fold appears in many sedimentary areas, between thick and thin layers, made by slipping between layers. The fold has more than one hinges, which is the result of uncoaxal superimposed fold, underwent B type fold in early time and A type fold in late time. There is little report about this fold, however it is ubiquitous. In this paper, the author introduced the output state on field of this fold in Tibet, Hubei Wuhan, Sichuan Xichang firstly, then described the geometry shape characters in all trend of this fold, analyzed the deformation control condition of this fold, finally discussed the form and evolvement mechanisms of this fold based on Slump Fold Limit and reference of the form mechanism of sheath fold. -
图 1 层间滑动褶皱在横剖面(a) 及纵剖面(b) 上具有的形态特征
Fig. 1. Shape characters sketch map of slip fold between layers at cross section (a) and profile (b)
图 2 具有两个方向褶皱枢纽及叠加褶皱特点的层间滑动褶皱(a) 和偏Ⅰ型层间滑动褶皱的水平剖面特征及沙丘状空间形态(b)
Fig. 2. Slip fold between layers which has two hinges and superimposed fold characteristic (a) and the horizontal section characteristic and dune spatial shape of slip fold between layers which is close to Ⅰ type (b)
-
[1] Billings, M. P., 1942. Structural geology. Translated by Zhang, B. X. . Geological Publishing House, Beijing, 61, 96-100 (in Chinese). [2] De Sittes, L. U., 1956. Structural geology. Translated by Zhang, W. Y. . Science Press, Beijing, 153-155 (in Chi-nese). [3] George, H. D., Stephn, J. R., 1996. Structural geology of rocks and regions. John Wiley and Sons, INC, 373-401. [4] Ji, L., 1995. The microstructure character of large tenacity shear zone in the eastern of Wugong mountain, Jiangxi Province. Earth Science—Journal of China University of Geosciences, 30 (1): 95-105 (in Chinese with English abstract). [5] Jiao, P. X., Zhao, P. J., Wang, H. L., 1996. The geological significance of two types tenacity shear zones in deep metamorphic rock area in Long County, Shaanxi Province. Shaanxi Geology, 14 (2): 13-21 (in Chinese with English abstract). [6] Liu, D. L., Yang, Q., Wu, X. Q., et al., 2006. The original study of the tenacity shear zone′s formed time in Fucha mountain, Anhui Province, Tanlu fault. Scientia Geological Sinica, 41 (2): 333-343 (in Chinese with English abstract). [7] Ramsay, J. G., 1967. Foldin and fracturin of rocks. Translated by Shan, W. L., Song, H. L. . Geological Publishing House, Beijing (in Chinese). [8] Robert, D. H. J., 1995. Structural geology: Principles, concepts, and problems, second edition. By prentice-Hall, Inc. A simon and Schuster company Englewood cliffs. New Jersrey 0763, 273-325. [9] Ruud, W., 1997. Structural geology and map interpretation. Alboran Science Publishing, U. S. A., 532-550. [10] Suo, S. T., Zhong, Z. Q., Zhou, H. W., et al., 2004. The structure evolvement of Dabie-Suluultra-high pressure and high pressure metamorphic belt. Earth Science Frontiers, 11 (3): 71-81 (in Chinese with English abstract). [11] Wang, J. S., Yan, W. X., Wei, Q., 1996. The solid state rheological structure community and its effect to turquoise deposit. Hubei Geology, 10 (2): 62-97 (in Chinese with English abstract). [12] Wang, X. W., Yuan. Z. X., Wang, X. D., 2004. The tenacity shear in the fault fragmentation silicified zone in Gannan-Nankang area. Journal of Chengdu University of Technology (Sci and Technol Edition), 31 (4): 352-358 (in Chinese with English abstract). [13] Wu, X. G., Sun, L. X., Guo, J, C., et al., 2005. The Geologycharacter and significance of tenacity shear zone in the suture zone of Brahmaputra. Geotectonicaet Metallogenia, 29 (2): 198-203 (in Chinese with English abstract). [14] Wu, Y. M., 2003. The microstructure and kinematics charac-ter of Weizhuang tenacity shear zone. Xinjiang Geology, 21 (2): 243-244 (in Chinese with English abstract). [15] Yang, X. Y., 2005. The study of tenacity shear zone and its geological significance. Advances of Earth Science, 20 (7): 765-771 (in Chinese with English abstract). [16] Zhu, Z. C., Song, H. L., 1999. Structural geology. China University of Geosciences Press, Wuhan, 81-111 (in Chinese). [17] 毕令斯, 1942. 构造地质学. 张炳熹译. 北京: 地质出版社, 696-100. https://www.cnki.com.cn/Article/CJFDTOTAL-DXQY201401015.htm [18] 狄塞特尔, 1956. 构造地质学. 张文佑译. 北京: 科学出版社, 153-155. https://cpfd.cnki.com.cn/Article/CPFDTOTAL-ZGDJ200612005007.htm [19] 吉垒, 1995. 江西武功山东区大型韧性剪切带的显微构造特征. 地球科学———中国地质大学学报, 30 (1): 95-105. https://www.cnki.com.cn/Article/CJFDTOTAL-DZKX501.010.htm [20] 校培喜, 赵平甲, 王洪亮, 1996. 陕西陇县深变质岩区两类韧性剪切带的确定及地质意义. 陕西地质, 14 (2): 13-21. https://www.cnki.com.cn/Article/CJFDTOTAL-SXDY199602001.htm [21] 兰姆赛, 1985. 单文琅, 宋鸿林译. 岩石的褶皱作用和断裂作用. 北京: 地质出版社. [22] 刘德良, 杨强, 吴小奇, 等, 2006. 郯庐断裂安徽段桴槎山韧性剪切带的形成时限初探. 地质科学, 41 (2): 333-343. https://www.cnki.com.cn/Article/CJFDTOTAL-DZKX200602013.htm [23] 索书田, 钟增球, 周汉文, 等, 2004. 大别—苏鲁超高压和高压变质带构造演化. 地学前缘, 11 (3): 71-81. https://www.cnki.com.cn/Article/CJFDTOTAL-DXQY200403011.htm [24] 王家生, 颜慰宣, 魏清, 1996. 鄂西云盖寺地区固态流变构造群落及其对绿松石矿的控制作用. 湖北地质, 10 (2): 62-97. https://www.cnki.com.cn/Article/CJFDTOTAL-HBDK602.006.htm [25] 汪雄武, 袁正新, 王晓地, 2004. 论赣南大余-南康地区断层破碎硅化带的韧性剪切作用. 成都理工大学学报(自然科学版), 31 (4): 352-358. https://www.cnki.com.cn/Article/CJFDTOTAL-CDLG200404004.htm [26] 吴新国, 孙立新, 郭金城, 等, 2005. 雅鲁藏布江缝合带内韧性剪切带的地质特征及其意义. 大地构造与成矿学, 29 (2): 198-203. https://www.cnki.com.cn/Article/CJFDTOTAL-DGYK200502005.htm [27] 吴玉门, 2003. 卫庄韧性剪切带显微构造解析及运动学特征. 新疆地质, 21 (2): 243-244. https://www.cnki.com.cn/Article/CJFDTOTAL-XJDI200302025.htm [28] 杨晓勇, 2005. 论韧性剪切带研究及其地质意义. 地球科学进展, 20 (7): 765-771. https://www.cnki.com.cn/Article/CJFDTOTAL-DXJZ200507010.htm [29] 朱志澄, 宋鸿林, 1999. 构造地质学. 武汉: 中国地质大学出版社, 81—111. https://www.cnki.com.cn/Article/CJFDTOTAL-DXQY201401015.htm -
下载:
点击查看大图
图(3)
计量
- 文章访问数: 2911
- HTML全文浏览量: 106
- PDF下载量: 264
- 被引次数: 0
